Published on FabPro 1000 (http://infocenter.3dsystems.com/fabpro1000)

Home > User Guide > Setting Up Your Printer > Install Print Platform

Install Print Platform

Watch the video!

 

Always wear nitrile gloves when handling the print Platform, as it could have uncured material on it that could irritate the skin.

NOTE: Before performing this procedure, ensure that elevator is at its upper limit, or offload, position.

 

  1. Install the print platform in the machine, using the guides on either end of the elevator platform to guide the print platform into place.
remov-print-plat.png
  1. Push down the handle to lock the print platform in place.

    NOTE: The printer checks if the print platform is present and if the handle is locked down. The printer will not print unless both conditions are met. If either condition is not met, you will receive the error message below before the print process begins.

    platform-not-detected.jpg

    CAUTION: Do NOT lift up the locking handle during printing. Doing so will abort the print job.

lock-print-plat.png
#social-bar { width:100%; background-color: #424242; } .social-circle { background-color: #dcdcdc; border-radius: 50%; height: 30px; width: 30px; margin-left: 10px; } .privacy-line { width:auto; margin:0 auto; border-collapse:separate; border-spacing:10px; color:#a7a7a7; font-size: 17px; font-weight: 500; display: flex; padding: 1% 30%; } #privacy-line a { font-weight:500 !important; } #footer-2020 { background: #585858; color: white; text-align: center; font-size: 14px; column-count: 3; padding: 1% 33%; } #footer-2020 table { width:auto; margin:0 auto; border-collapse:separate; border-spacing:20px; } #footer-2020 a { font-weight: bold; font-size: 18px; letter-spacing: 1px; } .footer { position: inherit; right: 0; left: 0; height: 40px; width: 100%; font-size: 13px; } .footer a { color: #cfcfcf !important; text-decoration: none; } .footer-sub-title {font-weight: bold; letter-spacing: 1px;} .footer a:hover { color: #efeeee !important; text-decoration: none; } ul.footer-context li { list-style: none !important; font-size: 15px; padding-left: 0px; } .footer-context { font-size: .875rem; font-weight: 600; letter-spacing: 0.8px; } .footer-info-2 { background-color: #424242; padding: 1% 20%; display: flex; border: 0; } .footer-content {margin-left: 4%;} .footer-sns { margin: 0 auto; display: flex; padding: 0.5% 40%; } .footer-sns-img { height: 75%; padding-top: 25%; } .privacy-line-terms {padding-left: 2%;} /* ----------- iPhone X ----------- */ /* Portrait */ @media only screen and (min-width: 375px) and (max-height: 812px) and (-webkit-min-device-pixel-ratio: 3) and (orientation: portrait) { .footer {display: block;} #footer-2020 {column-count: 1;} .privacy-line {display: block; padding: 1% 5%;} .footer-info-2 {padding: 5%; display: block; column-count: 1;} .footer-sns {padding: 0.5% 5%;} } /* Landscape */ @media only screen and (min-height: 375px) and (max-width: 812px) and (-webkit-min-device-pixel-ratio: 3) and (orientation: landscape) { .footer {display: block;} .wrap-landing-page-column {margin-left: 2%;} #footer-2020 {padding: 2% 12%;} .footer-info-2 {padding: 1% 2%;} .footer-sns {padding: 0.5% 29%;} .footer-sns {padding: 0.5% 29%;} .privacy-line {font-size: 13px; padding: 1% 10%;} } /* ----------- iPad ----------- */ /* Portrait */ @media only screen and (min-width: 768px) and (max-height: 1024px) and (orientation: portrait) and (-webkit-min-device-pixel-ratio: 1) { #footer-2020 a {font-size: 16px;} #footer-2020 {padding: 2% 10%;} .footer-info-2{padding: 1% 4%;} .footer-sns {padding: 1% 27%;} .privacy-line {font-size: 14px; padding: 1% 2%;} .footer-content {margin-left: 2%;} } @media screen and (min-width: 1024px) { #footer-2020{padding: 1% 20%;} .footer-info-2 {padding: 2% 8%;} .footer-sns {padding: 0.5% 33%;} .privacy-line {padding: 2.5% 8%;}} @media screen and (min-width: 1366px) { #footer-2020 { padding: 1.2% 24%;} .footer-info-2 {padding: 1% 15%;}.footer-sns {padding: 1% 36%;} .privacy-line {padding: 2% 17%;}} @media screen and (min-width: 1800px) { #footer-2020 {padding: 0.8% 30%;}.footer-info-2 {padding: 1% 25%;} .footer-sns { padding: 0.5% 41%; } .privacy-line {padding: 1% 27%;} .banner-graphic {background-position: -250px -50px;}}
HOW TO BUY
CONTACT US
CUSTOMER SUPPORT

SOLUTIONS

  • By Application
  • By Industry
  • By Workflow
  • By Products & Services
  •  

RESOURCES

  • Webinars
  • Customer Stories
  • Blog
  • Video Gallery
  •  

SERVICE SUPPORT

  • 3D Printers
  • Software
  • Materials
  • On Demand Manufacturing
  •  

HOW TO BUY

  • 3D Printers
  • 3D Scanners
  • Software & Haptic devices
  • Healthcare Solutions
  •  

ABOUT US

  • Our Story
  • Press Room
  • Investor Relations
  • Careers
  • Events
Connect with us:
Privacy Policy
Sales Terms
Terms and Conditions
Copyright ⓒ   3D Systems, Inc. All rights reserved.
var d = new Date(); document.getElementById("year").innerHTML = d.getFullYear();

Copyright © 3D Systems, Inc. All rights reserved. | Source URL: http://infocenter.3dsystems.com/fabpro1000/user-guide/setting-your-printer/install-print-platform