These are messages you may see after sending a print job to the printer via 3D Sprint or USB. For more information, please see the section Begin Your Print Job.
Printer Message | Translation | |||
![]() |
Print job |
This message occurs after you press the power button once while in idle mode. | ||
![]() |
MyPrintJob.pxl |
This message occurs when you hold down the power button on the screen described above. For seeing this screen during USB file submit, please see the section USB File Submit Messages. |
||
![]() |
Verifying build | This message occurs after you hold down the power button on the previous screen. | ||
![]() |
Please scan |
This message occurs after confirming the "my-print-job.pxl" message above. Scan the barcode on the material bottle you are using for the print job. | ||
![]() |
Abort job? |
This message occurs if you press the power button at any time during the print process. Hold down the power button to confirm cancelation of print job. | ||
![]() |
User stopped print |
This message occurs if you hold down the power button to confirm cancelation of a print job, as in the message above. If you abort the print job, you must:
|
||
![]() |
Print aborted |
This message occurs after a print has been aborted, but before the operator pushes the power button to clear the message. | ||
![]() |
Printer error |
This message occurs when the printer stops a build because of a build error. | ||
![]() |
Printer aborting |
This message occurs when the printer stops a build because of an elevator error when homing the elevator. | ||
![]() |
Install and Lock Platform/Hold btn to continue |
Occurs when the printer does not detect a print platform securely locked in the machine. When you see this message:
|
||
![]() |
Hold btn to abort |
When you see this screen, you may:
|
||
![]() |
Printing |
You will see a screen like this during printing, showing you how much time is remaining for the print job. The time format for the timer is HR:MM. | ||
![]() |
Print complete |
Print has finished. Proceed to the steps in the section Post Processing. | ||
![]() |
Build file error | Occurs when the print job is aborted due to a build file error. |