Build Settings

Build Settings

Print Mode The software has four modes including 3 set modes and one custom mode. Raft and Support Selection of the types of materials used to create rafts, supports and sidewalks.
Layer Resolution The detail and smoothness of a part. Advanced Adjustments to print pattern fill and the creation shell.
Print Strength The strength of the inner structure of a creation. Help Opens the help menu.
Print Pattern The design of the inner structure of a creation.      

Descriptions

Print Mode  
  Standard
  • Layer Resolution: 200um
  • Print Strength: Strong
  • Print Pattern: Diamonds
  Premium
  • Layer Resolution: 70um
  • Print Strength: Strong
  • Print Pattern: Diamonds
  Draft
  • Layer Resolution: 300um
  • Print Strength: Strong
  • Print Pattern: Lines
  Custom Custom allows the user to customize their print settings
Print Resolution  
  0.070
  • Great mode for parts requiring smooth surfaces
  • Layer lines are not very visible in these parts
  • Good mode for artistic parts with a smooth flow
  • Not the best mode for fine detail
  0.200
  • Best mode for general printing and most compatible mode for a wide range of geometries
  • Fine detail preservation for things like steeples, spires, sharp points, or thin walls
  0.300
  • A fast mode with thicker layers
  • Good for large parts with minimal detail
Print Strength  
  Hollow
  • Fastest mode to produce a part
  • Hollow has fewer outer surfaces and larger print pattern spacing
  • Best for parts that will not be stressed
  Strong
  • Medium amount of outer surfaces and smaller print pattern spacing
  • Best for parts that will have minimal physical abuse
  Almost Solid
  • The most surfaces and the tightest print pattern spacing
  • The most robust part
  • Best for parts that will be stressed
Print Pattern  
  Lines
  • Fastest print fill pattern
  • Minimal cross bracing
  Diamonds Strong print pattern with 2-direction cross bracing
  Honeycomb Strong print pattern with 3-direction cross bracing