![]() |
Interface Tabs |
![]() |
Tool Ribbon |
![]() |
Model Size and Position |
![]() |
Print Material Configuration |
![]() |
Print Pad |
CAD File Functions
![]() |
Home Tab | The main tab | ![]() |
Close All | Closes all open .stl files |
![]() |
Open Model | Opens a .stl file | ![]() |
Save As | Saves the current .stl file |
![]() |
Open Model Assembly | Opens a multi-part assembly of .stl files | ![]() |
Single Color | Check the box if the model will print using a single color |
![]() |
Open Manual Support | Import nylon manual supports | ![]() |
Duplicate | Creates a duplicate of a selected part |
![]() |
Close | Closes an open .stl file |
Geometry Functions
![]() |
Movement Geometry Value Fields | Enter the appropriate values to move the model. | ![]() |
Scale | Scale the model by the specified percentage. |
![]() |
Move X Button | Once a value has been entered, select the button to move the model left or right. | ![]() |
Revert | Undo the scaling and revert back to the original size. |
![]() |
Move Y Button | Once a value has been entered, select the button to move the model forward or backward. | ![]() |
Rotate Geometry Value fields | Enter values to rotate the model |
![]() |
Auto Place | Auto Place the model to the center of the print area. | ![]() |
X | Rotate the model front-to-back on the X axis by the specified value. |
![]() |
Move Model | Once this button has been selected, left click on the model and drag it into position. | ![]() |
Y | Rotate the model left and right on the Y axis by the specified value. |
![]() |
Scale Value Field | Enter the scale percentage | ![]() |
Z | Rotate the model up and down on the Z axis by the specified value. |
![]() |
- to mm | Scale the 3D model to the millimeter value entered in the field. | ![]() |
Revert | Undo the applied rotation and revert to the original position. |
![]() |
+ to Inch | Scale the 3D model to the inch value entered in the field. |
Color, Build, Print File And Help
![]() |
Material 1 Color | Select shells to be rendered by print jet 1 | ![]() |
Close | Close a print file |
![]() |
Material 2 Color | Select shells to be rendered by print jet 2 | ![]() |
Save Print File | Save a build print file |
![]() |
Material 3 Color | Select shells to be rendered by print jet 3 | ![]() |
Send | Send a print job through the wireless network to a connected printer |
![]() |
Build Button | Process the 3D model to obtain a print file | ![]() |
Help | Help menu |
![]() |
Open | Open a print file |