Find Brill 3D Culinary Printer on Your Network

Your printer installer should have connected your printer to 3D Sprint for you; however, if your printer should ever become disconnected, the following instructions will set your printer up on your network.

  1. Open 3D Sprint.
  2. If the Printer dialog box is not already open, click the printer-icon.jpg icon in the upper-left-hand corner (1).
  3. In the Printer dialog box, click the Find Printer button (2). 3D Sprint should find your printer on the network. If this does NOT happen, enter your printer's IP address in the Find by printer IP field (3) and press Enter. The printer's IP address can be found by going to settings-cog.jpg > network-icon.jpg on the touch screen.
    find-ip-on-printer.jpg
  4. Back in 3D Sprint, click the printer icon (4) that comes up. Click Next (5).
find-printer-in-sprint.jpg

NOTE: If your network has a firewall, you must make the printer's IP address an exception on it to find the printer on your network. Contact your network administrator for more information.

 

There are several different Print Modes and Build Styles to choose from.

  1. Click the icon of the Print Mode you will use in your build. Click Next. See the section Print Modes and Build Styles for more information.
Select-Print-Mode.jpg
  1. Click the icon of the Build Style you will use in your build. Click Set. See the section Print Modes and Build Styles for more information.
Select-Build-Style.jpg