Fill Binder Tanks

WARNING: Binder is flammable. dO NOT PERFORM THESE STEPS AROUND IGNITION SOURCES.

The printer will ask you to ensure that binder tanks are full when submitting a print job. However, you may fill the binder tanks at any time, even during printing. This section will guide you through the process.

  1. Open a binder tank by pulling on the tethered cap.
yellow-binder-open.jpg
  1. Shake your binder-refill bottle well before pouring. Pour the binder from your refill bottle into the same-colored binder tank until it is roughly half-full.

CAUTION: After filling, ensure the following: 1. The tethered cap is firmly seated on the binder tank; and, 2. The binder-refill bottle, if still containing binder, is securely sealed. Binder will evaporate over time if left exposed to open air. Failure to secure the tethered cap and binder-refill cap may alter the properties of the binder and lead to print-quality issues.

fill-binder-clear.jpg