Clean Back Panel

Since consumable printed parts will only be located inside the work area, the areas of the machine you must sanitize are limited to that area. This procedure will show how to clean the different sections of the work area.

  1. Remove the back panel from the machine frame by opening the latches and lifting the panel off.
remove-finishing-back.jpg
  1. Remove the wing nuts from the perimeter of the back panel.
finishing-back-panel-wing-nuts.jpg
  1. Remove the back panel by the handles.
finishing-remove-back-panel.jpg
  1. Remove the weather stripping from the back panel.

remove-weather-stripping-2.jpg

finishing-back-remove-weather-stripping.jpg
  1. Clean the back panel and weather stripping with your sanitizing solution and a clean, dry cloth.

clean-finishing-back-panel.jpgclean-weather-stripping.jpg

  1. Reinstall the weather stripping around the back panel.
reinstall-weather-stripping.jpg
  1. Reinstall the work-area back panel, securing it with the wingnuts removed earlier.
finishing-back-panel-wing-nuts.jpg
  1. Reinstall the machine back panel, securing it with the two latches.
remove-finishing-back.jpg