Figure 4 TOUGH-BLK 20

Figure 4™  TOUGH-BLK 20 is a rigid, black plastic with industry-leading UV stability. It is ideal for high-performance, functional prototyping applications.


Accuracy Tips

In order to achieve good accuracy with TOUGH-BLK 20, it is important to follow the part setup instructions below for orientation and supports. Some other key tips are as follows:

  1. Use orientation to minimize large cross sections areas.
  2. For full platforms and parts with cross sectional areas, print quality is best in Premium mode. Or add 1-2 seconds to slow down the Interval Pause Time and the Interval Down Time in the Build Style by an extra 1-2 seconds.
  3. Verify proper cleaning method. Ensure cleaning solvents are not saturated and parts are allowed to dry before post cure.


Please see Orientation section for TOUGH-GRY 10.

General Flat Tip Supports

Please see General Flat Tip Supports section for TOUGH-GRY 10.

Fine Flat Tip Supports

Please see Fine Flat Tip Supports section for TOUGH-GRY 10.

Additional Tips & Tricks

Please see Additional Tips & Tricks section for TOUGH-GRY 10.